Setup Instructions
Follow these simple steps to install and set up your ATH Bridge server:
Step 01 : Remove the Pre-Flashed SD Card from the Packaging
Open the packaging and carefully locate the pre-flashed SD card that came with your ATH Bridge server.
Step 02: Insert the SD Card into the Server
Insert the pre-flashed SD card into the designated slot on your ATH Bridge server.
Step 03: Connect the Server to Your Router
Using the provided Ethernet cord, connect the ATH Bridge server to your router.
Step 04: Power On the Server
Turn on the server by pressing the designated power button or switch.
Step 05: Locate the Server's IP Address
Access your router settings and find the IP address assigned to your ATH Bridge server.
Step 06: Enter the Server's IP Address with Port 8581
- Open a web browser on your computer or mobile device.
- In the URL bar, type http://[Server_IP_Address]:8581 (replace [Server_IP_Address] with the IP address you found in Step 5).
- Example: http://192.168.1.10:8581
Step 07: Log In to the Server
- When prompted, enter the following default login credentials:
- Username: admin
- Password: admin
Step 08: Select and Install Plugins
- After logging in, navigate to the Plugin section.
- Browse and select the plugins you wish to install for your smart home setup.
Step 09: Configure the Server
- Customize and configure the settings based on your preferences and requirements once you’ve logged into the server.